Tecno Spark 50 Pro unboxing and hands-on | Infinium-tech
After the Tecno Spark 50 5G and Spark 50 4G, Tecno unveils the Pro member of the series. We have the Spark 50 Pro, so let’s see what it’s all about.

Let’s start by opening the box and see what’s inside.
The device comes with a USB-A to USB-C cable used for charging and data transfer, a compatible Tecno charger rated up to 60W, and a soft-touch silicone case that matches the color of the device.
The design of the Spark 50 Pro, especially the Dynamic Orange, is quite reminiscent of the iPhone 17 Pro/Pro Max. You can also get it in Midnight Blue (the second color pictured below), Ink Black, Titanium Grey, and Cloud White. Check them out in our action tiktok
Dynamic Orange and Midnight Blue colors
The body is flat for the most part, only 7.8mm thin, light and durable. It provides IP68/IP69 ingress protection.
The handset is built around a 6.78-inch IPS LCD panel with a 120Hz refresh rate, while the Helio G100 chipset is tasked with doing the number crunching. You can get the phone in only one memory configuration – 8GB/256GB.
Battery endurance and charging is where the Tecno Spark 50 Pro shines. It uses a generous 6,000 mAh single-cell battery, but some markets get a dual-cell version with a slightly smaller 5,600 mAh unit. In any case, you get 60W wired charging with the charger provided in the box.
Tecno promises at least 1,900 charging cycles or at least 6 years of usage before significant battery degradation occurs.

The camera hardware is quite simple – there’s a 50MP Sony LYTIA 600 f/1.8 camera on the back, while on the front there’s an 8MP snapper with a dedicated flash for better selfies in low light.
Last but not least, the Spark 50 Pro has a set of DTS stereo speakers for the complete multimedia experience.
Of course, the handset boots Android 16 with Tecno’s HiOS on top.











Leave a Reply